Disk Removable Electrode assembly
Here are some manual instructions movies.
In this section, a guidance for the setup with an useful instruction for the handling of your Disk Removable Electrode (DRE).
- DRE electrode assembly methods Part1:Front Assembly
- DRE electrode assembly methods Part2:Rear Assembly
DRE electrode assembly methods Part1:Front Assembly
The assembly of the DRE is shown step by step in two movies. The part 1 for the front assembly and part 2 for the rear assembly.
Part 1 movie for the front assembly, it makes possible the polish of the electrode after finished the assembly.
DRE electrode assembly methods Part2:Rear Assembly
Part 2: Rear assembly, assembling procedure to avoid that the disk electrode surface can be touched.
It is required for the assembly of the surface modified disk electrode.
※ Each movie is for the old product (013340), refer to the handling instruction manual below for the new product.
Click here for the instruction manual for the 013608 DRE-DCP Disk electrode polishing and exchanging tool kit manual.
※ There is also an explanation about polishing the disc electrode.